Lemon R52 Pathfinder Nissan Automotive.
22, Adjustment ProceduresKIB Tighten lock nut to 20 ft-lbs/27 Nm. Front proc. Back off 90°.
Stopping the rotation during installation will cause the nylon lock to seat incorrectly. Under torque of an axle nut will allow excessive movement causing uneven loading and excessive wear. 17, Footnote codes - continued[34] First design nut (Pac-style nut painted black) 284 ft-lbs/385 Nm; second design nut (solid gray nut), 173 ft-lbs/235 Nm. Turn the locknut until force to turn hub with a spring scale attached to a lug stud is SZA Tighten adjusting nut while turning wheel to 58 .77-1.92 lbs/.35-.87 kg. [15] With 10 1/2 or 12 1/2 ring gear. Back off 1/3 turn.
Spanner.
rotating hub.
Tighten to 65 ft-lbs/90 Nm.NDB Tighten hub nut to 18-22 ft-lbs/22-26 Nm. Back off up to 45° scale on hub wheel stud to measure bearing and install cotter pin. Align turning hub. Back off to 0. Turn the hub 2-3 times. Front proc. Then bend tabs on washer over inner and outer nuts.DAE Using a new caulking nut, tighten to 133 ft-lbs/181 Nm, then loosen nut. Install locknut and tighten to 250 ft-lbs/339 Nm. Tighten the DTJ Tighten locknut to 120 ft-lbs/165 Nm. Tighten adjusting nut to 11 ft-lbs/15 Nm. Repeat while rotating hub and drum.
After tighten to 18-20 in-lbs/2-3 Nm. GVW. 70 ft-lbs/95 Nm, nut will ratchet. Bend two tabs of lock into spindle keyway by inserting the short leg washer over adjusting nut and locknut. Back off and finger tighten. Back off to 0. Insert lock turning hub. Tighten adjusting nut to 4 ft-lbs/6 Nm.
Rear proc.
DTI Tighten adjusting nut to 50 ft-lbs/68 Nm andDAC While spinning wheel, tighten nut to 15 ft-lbs/ then loosen. 150°.
or torque or torque or torque or torque Make ft-lbs/Nm ft-lbs/Nm Make ft-lbs/Nm ft-lbs/Nm year Model year Model TOYOTA - continued VOLKSWAGEN - continued 1997 RAV4 4 W/D, 2 W/D.............159/216 159/216 2006-98 New Beetle................................... VWC 129/175 w/ABS 2006-98 Passat FWD....................................[31] AIA 1996 RAV4 ......................................159/216 152/206 Passat AWD....................................[31] 2007-01 Sequoia .................................173/235 — 1997-95 Passat w/Base.......................195/265 85/115 2007 Sienna AWD .........................217/294 Suspension FWD VWB 2006-04 Sienna AWD .........................217/294 159/216 Passat w/Plus......................66/90[27] 2007-98 Sienna FWD .........................217/294 217/294 Suspension FWD 66/90[27] 1984-81 Starlet .............................................TAE Passat w/Base.......................195/265 1998-93 Supra .....................................147/199 — Suspension 4 W/D 66/90[27] 1992-87 Supra .....................................147/199 — Passat w/Plus......................66/90[27] 1986 Supra 2.8L ............................100/137 213/289 Suspension 4 W/D VWB 1986 Supra 3.0L ............................147/199 203/275 1994-90 Passat Synchro......................195/265 1985-82 Supra .....................................100/137 100/137 Passat Exc. Install the locknut and cotter pin. [39] With Dana 70 axles tighten bolts to 105 ft-lbs/143 Nm loosen 90°, tighten to 70 ft-lbs/95 Nm 90°, tighten to 70 ft-lbs/95 Nm loosen 90°, tighten 18 ft-lbs/24 Nm. off slightly to install cotter pin.FTW Tighten the adjusting nut to 35 ft-lbs/47 Nm GMD Tighten adjustment nut to 50 ft-lbs/68 Nm while turning hub. Install cam assembly. Force to turn hub with a spring scale attached to a lug stud should be 9.5-15 lbs/42-67 N. Install washer and tighten locknut to 47 ft-lbs/64 Nm.VOA Tighten adjusting nut to 50 ft-lbs/68 Nm while rotating wheel. I thought I read it was 125 but for the life of me I cannot remember where I found it.
Rear proc. Torque locknut 5 clicks (used bearing) or 7 clicks (new bearing). Turn in pin must align with locknut, turn adjusting nut the hub 2-3 times and loosen the nut. Install cotter pin. The market is the region where the car was sold or is still being sold. washer. should be .001-.010.\"FDA Tighten hub nut to 17-25 ft-lbs/22-29 Nm FTJ Tighten adjusting nut to 50 ft-lbs/68 Nm while while rotating wheel. Please double checked these torque specs with Nissan. Rear proc.
Back off 180°.
Install locknut and tighten to 250 ft-lbs/339 Nm. Back off and retighten to 35 ft- the holes in the lock washer with the nut. Bend washer Using in-lbs torque wrench on wheel stud, tab over adjusting nut and locknut. Back off and tighten again. Install bearing thrust spacer, needle thrust bearing, and axle shaft FT2 Tighten hub nut to 17-24 ft-lbs/22-34 Nm spacer. [7] With Rockwell 12 or 12 1/4 ring gear. Force to turn hub with a spring scale attached to a lug stud should be 4.6-7.9 lbs/2.1-3.6 kg. Install lock nut slightly. while turning wheel.
Quote; Post by TheOne » Wed Jan 05, 2005 12:34 pm . Insert key, retaining ring, Nm.
Endplay be .001-.010\". [16] Tighten nut to specified value and tighten further to align cotter pin with hole. GME Tighten adjusting nut to 50 ft-lbs/68 Nm while rotating hub and disc. Rear proc. or torque or torque or torque or torque Make ft-lbs/Nm ft-lbs/Nm Make ft-lbs/Nm ft-lbs/Nm year Model year Model MAZDA - continued MERCURY - See FORD/MERCURY 1991-88 929 ........................................100/138 203/275 MINI — 1987-80 B2000 Pickup ..............................MAC — 2005-02 Cooper....................................134/182 — 1993-82 B2200 Pickup ..............................MAC MITSUBISHI — — 2007-01 B2300 Pickup 2 W/D ...................FT2 — 1999-91 3000GT 4 W/D .....................166/225 3000GT FWD .......................166/225 B2300 Pickup 4 W/D ..........162/220 — 1988-83 Cordia, Tredia ........................167/226 2004-97 Diamante ..............................167/226 1997-94 B2300 Pickup 2 W/D ................... FTA — 1996-92 Diamante ..............................167/226 2007-00 Eclipse ...................................167/226 B2300 Pickup 4 W/D .......... FTW[20] — 1999-95 Eclipse 4 W/D .......................167/226 203/280 — Eclipse FWD ..........................167/226 166/225 FTX[21] — 1994-90 Eclipse 4 W/D .......................167/226 Eclipse FWD ..........................167/226 MIA 2001 B2500 Pickup 2 W/D ...................FTP — 2007-04 Endeavor ...............................167/226 — 1996-92 Expo .......................................167/226 B2500 Pickup 4 W/D ..........162/220 — 2007-94 Galant ....................................167/226 166/225 — 1993-89 Galant 4 W/D ........................167/226 - 2000-98 B2500 Pickup 2 W/D ................... FTA 1993-89 Galant FWD ..........................167/226 — 1988-85 Galant ....................................167/226 166/225 B2500 Pickup 2 W/D ...................[25] — 2006-02 Lancer ...................................181/245 — — 2001-93 Mirage ...................................167/226 1993-87 B2600 Pickup 2 W/D ..................MAC 1992-89 Mirage ...................................167/226 138/190 — 1988-85 Mirage....................................167/226 166/225 B2600 Pickup 4 W/D ................. MAD — 2006-04 Montero..................................148/200 167/226 2003-01 Montero..................................188/255 166/225 2007-01 B3000 Pickup 2 W/D ...................FT2 MAB 2000-83 Montero...........................................DTF — 2004-97 Montero Sport 2 W/D................... DTJ — B3000 Pickup 4 W/D ..........162/220 — Montero Sport 4 W/D................... DTJ MIA 2007 Outlander 2 W/D...................129/176 MIA 2000-98 B3000 Pickup 2 W/D ................... FTA 214/290 Outlander 4 W/D...................129/176 MIA — 2006-03 Outlander 2 W/D...................181/245 130/175 B3000 Pickup 4 W/D ...................[25] — Outlander AWD.....................181/245 130/180 1996-83 Pickup 2 W/D................................. CRD 127/175 1997-94 B3000 Pickup 2 W/D ................... FTA 152/206 Pickup 4 W/D..................................DTF 90/125 205/277 1994-93 Precis......................................170/230 188/255 B3000 Pickup 4 W/D .......... FTW[20] 1992-90 Precis......................................167/226 188/255 — 1989-87 Precis......................................167/226 FTX[21] 152/206 2007-06 Raider.....................................185/251 — 152/206 1990-88 Sigma.....................................167/226 — 2007-01 B4000 Pickup 2 W/D ...................FT2 1989-84 Starion............................................ CRB — — 1990-87 Van.................................................. CRD — B4000 Pickup 4 W/D ..........162/220 — 129/176 152/206 NISSAN/DATSUN 130/175 2000-98 B4000 Pickup 2 W/D ................... FTA 188/255 181/245 — 1998-95 200SX.....................................174/236 — B4000 Pickup 4 W/D ...................[25] — 1988-80 200SX............................................ NDB — — 1982-80 210.................................................NDE 127/175 1997-94 B4000 Pickup 2 W/D ................... FTA — 1998-95 240SX.....................................181/245 127/175 — 1994-89 240SX.....................................134/182 HIA B4000 Pickup 4 W/D .......... FTW[20] 152/206 1983-80 280ZX............................................ NDB — 203/275 1996-90 300ZX.....................................181/245 MIA FTX[21] 203/275 — — — 1985-81 GLC Exc.